KATBO Automatic Battery Charger 12V 6V Auto-Voltage Detection, Automotive battery charger 2Amp 6 Amp Lead Acid Batteries Float Charger Maintainer for Motorcycle Car Boat Marine Lawn mower Atv Toy Car

Price: $24.99
(as of Jun 30, 2024 05:15:32 UTC – Details)

Product Description

EASY TO USE FOR VEHICLES

CHARGING A BATTERY IN THE VEHICLE

WARNING: A spark near battery may cause a battery explosion.

IMPORTANT: Do not start the vehicle with the charger connected to the AC outlet, or it could result in damage to the charger

NOTE: This charger is equipped with an auto-start feature. Current will not be supplied to the battery clamps until a battery is properly connected. The clamps will not spark if touched together.

CHARGING A BATTERY IN THE VEHICLE

1.Turn off all the vehicle’s accessories.

2.Keep the hood open.

3.Clean the battery terminals.

4.Place the charger on a dry, non- flammable surface.

5.Lay the AC/DC cables away from any fan blades, belts, pulleys and other moving parts.

6.For a negative-ground vehicle (as in most vehicles), connect the charger’s POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery post. Next, connect the charger’s NEGATIVE (BLACK) clamp to the vehicle chassis or engine block, away from the battery.

7.For a positive-ground vehicle, connect the charger’s NEGATIVE (BLACK) clamp to the NEGATIVE (NEG, N, -) battery post. Next, connect the charger’s POSITIVE (RED) clamp to the vehicle chassis or engine block away from the battery. NEVER connect any clamps to the carburetor, fuel lines or sheet-metal body parts.

8.Connect the charger to an electrical outlet.

9.When charging is complete, disconnect the charger from the AC power, remove the clamps from the vehicle’s chassis, and then remove the clamp from the battery terminal.

CHARGING A BATTERY OUTSIDE OF THE VEHICLE

1.Place battery in a well-ventilated area.

2.Clean the battery terminals.

3.Connect the POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery post.

4.Position yourself and the “negative post extension” cable as far away from the battery as possible, and connect the NEGATIVE (BLACK) clamp to the cable’s free end.

5. Connect the charger to the electrical outlet.

6. Select the battery type and the charge rate.

7. When charging is complete, disconnect the charger from the AC power, disconnect the negative clamp, and finally the positive clamp.

8. A marine (boat) battery must be removed and charged on shore.

Microprocessor-controlled – automatically adjusts the charge current and maintainability.
Provide 2A and 6A charging current matching battery and Float Charger Maintainer, charging safe and extended battery life.
LED digital display voltage and power, automatic voltage detection:detection for 6V or 12V battery.
To achieve the highest industry standard of energy efficiency.
Overcurrent protection, overvoltage protection, overheat protection, reverse protection, with self-stop function.